Microdermabrasion Foam Filter Esthetic Supplies

Microdermabrasion Equipment Supplies

Microdermabrasion Foam Filters are a necessary item when sustaining and maintaining a good working microdermabrasion machine.

Gray foam filters are important for the life of Nue Skin Microdermabrasion Machines. However, it is important to always include LT filters for proper maintenance.

Foam filters are a disposable item. One filter has the lifespan of 10 microdermabrasion treatments, however a pack of 10 gives you 100 treatments. To maintain adequate equipment, supplies are crucial.

When preventing an over accumulation of aluminum oxide crystals or organic walnut grains remember to do this:

• After every microdermabrasion treatment
• Use a “Compressed Air Can” to blow out the foam filter. It needs to be “Cleaned and Free from Material”
• Apply Foam Filter over LT Filter
• Thread the canister tightly and securely

NEVER WASH or WET Gray Foam Filters, it will degrade the material quality and harm the internal machine components. That is why it is good to keep extra foam filters on hand to prevent damage to the microdermabrasion machine system.

Proper cleaning of filters help to maintain Nue Skin Microdermabrasion Machine warranty. It also improves the vacuum/suction performance of the machine. If the machine has poor vacuum/suction the #1 reason is the lack of filter maintenance.

The Perfect MATCH
It Takes Two to Make It Work!

It is important to make sure the Gray Foam Filter fits over the LT Filter. Nue Skin Microdermabrasion machines need both filters in order to maintain optimum performance.

It Takes Two to Preserve Microdermabrasion Machine Function

Replace the Gray Foam Filters after every 10 treatments to preserve the life of the LT Filter. LT Filters lifespan is 15 – 20 treatments, however, that depends how well the gray foam filter is maintained.

It is a good idea for licensed skin care professionals to keep a log of their maintenance procedures.

Enter the number of times the Gray Foam Filter has been used. When it has reached its maximum use, it may be changed. This simple task will prevent machine damage or impair the machine’s performance.

Compressed Air is the Solution

REMINDER!

When a licensed skin care professional purchases a Nue Skin Microdermabrasion Machine, there is enough supplies to start promoting Microdermabrasion Treatments in your spa or medical spa business.

One of the most important products in the microdermabrasion supply kit is the “Compressed Air Can”. This is extremely crucial when cleaning your foam filter and LT Filter to prevent crystal or organic grain material build up.

It may also be used to clean the waste canister and the large o-ring that is inside the wing of the canister. If you wash your waste canister please perform this task at the end of the day, so the canister may thoroughly dry overnight.

REMINDER!

Make sure the entire waste canister is dry before threading. Tighten the canister so there is no potential air leaks. Air leaks will slow the performance of the crystal or organic grain flow.

If  skin care professionals maintain the Gray Foam Filter & LT Filter the microdermabrasion machine’s lifespan may last up to 15 years without performance concerns.

Our microdermabrasion machines never QUIT!